{"id":7359,"date":"2017-03-17T12:21:58","date_gmt":"2017-03-17T03:21:58","guid":{"rendered":"https:\/\/manga-materials.net\/en\/3dlt-line-correction-%e3%83%bb-brick-arch-making\/"},"modified":"2017-08-05T15:51:13","modified_gmt":"2017-08-05T06:51:13","slug":"senhosei","status":"publish","type":"post","link":"https:\/\/manga-materials.net\/en\/senhosei\/","title":{"rendered":"3DLT Is The Life Of Line Correction. The Making Of Brick Arch."},"content":{"rendered":"

[vc_row][vc_column][vc_column_text]\u00a0<\/p>\n

3D LT conversion\u00a0is a dreamlike function that can\u00a0draw a line drawing with just one click.
\n <\/span><\/span>But 3D line drawing is same in all thickness and mechanical in nature.<\/span>
\n It is also easy\u00a0to recognize 3D line drawings at a glance.<\/span><\/span><\/p>\n

For this reason, 3D line drawing requires editing with functions of “correct line width tool” and “line correction filter”.<\/span><\/span><\/p>\n

This page introduces line correction of 3D line drawing based on brick arch 3D material.<\/span><\/p>\n

 <\/p>\n

Please refer to the following link for basic usage of 3D material.<\/span>
\n \u25cfBasics of 3D materials<\/span><\/strong><\/a><\/span><\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

\u00a0<\/h2>\n

Tips for 3DLT line drawing correction \u00b7 Brick making<\/span><\/h2>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

It is a line drawing right after 3D LT conversion.<\/span>
\n All lines are uniformity, it does not showed any perspective or texture.<\/span><\/span><\/strong><\/span><\/p>\n

\"bandicam<\/span><\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

Correct the entire lines first if the line is too thick (or too thin).<\/span><\/span><\/strong><\/span><\/p>\n

Change by click in Filter -> Correct Drawing Line -> Correct Line Width.
\n In Clip Studio Paint, fine numeric setting can only be done with the<\/span> raster layer<\/span>,
\n so please do LT conversion with the raster layer when modifying the whole line.
\n <\/span><\/span><\/strong><\/span><\/p>\n

\"bandicam-2016-12-15-12-59-10-607\"<\/span><\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

You can select the desired function from the red frame pull down.<\/span><\/span><\/strong><\/span><\/p>\n

\"bandicam-2016-12-15-13-03-36-062\"<\/span><\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

After correcting the whole, we will make a partial correction next.
\n The part that are closer to you are darker (thicker) and those are farther will be thinner (finer) in the basics of perspective.<\/span><\/strong><\/span><\/p>\n

\"\"<\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

With reference to the basic of the perspective,
\n make selection area of the part far from you<\/span>\u00a0and the part<\/span> that feels that the line is too thick<\/span>,
\n then correct the line width again.<\/span><\/span><\/strong><\/span><\/p>\n

\"\"<\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

Settings that are too fine are not reflected.
\n Tick the box to leave a line of 1 pixel<\/span>, the line width becomes the thinnest.<\/span><\/strong><\/span><\/p>\n

\"bandicam-2016-12-15-13-03-36-062\"<\/span><\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

When the rough line correction is completed,
\n take selection area of the shadow portion of the arch and cut out the line drawing.<\/span><\/strong><\/span>
\n \"bandicam<\/span><\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

While cutting the line drawing, maintains the selection area,<\/span>
\n Edit \u2192 Change color of the line to drawing<\/span> color and change it to white.<\/span><\/span><\/strong><\/span><\/p>\n

\"bandicam-2016-12-15-13-22-27-644\"<\/span><\/p>\n

\"bandicam<\/span><\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

Once you hide the white line drawing<\/span>,
\n make a new layer below, and fill in the selected area with black.<\/span><\/span><\/strong><\/span><\/p>\n

\"bandicam<\/span><\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

When you display the previous line drawing, the brick line will show up in the shaded shadow area.<\/span><\/strong><\/span>
\n \"bandicam<\/span><\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

Use the correct line width tool to fine-adjust the line\u00a0drawing.
\n (This tool only can use for vector layer.
\n <\/span><\/span><\/span><\/strong><\/span>Please convert the layer from raster to vector)<\/span><\/span><\/span><\/strong><\/span><\/p>\n

\"bandicam<\/span><\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

As in the basic of the perspective,
\n focused to correct on places where the distance is far and uniformity lines concentrate.<\/span><\/span><\/strong><\/span><\/p>\n

\"bandicam<\/span><\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

Add a shade with a tone based on the light source.
\n Ctrl + Left click on the layer of “ground” which is automatically created
\n at the time of LT conversion<\/span> can be selected.<\/span>
\n When paste a tone, it will make the work smoother.
\n <\/span>
\n \u203b The light source can be at your favorite position.<\/span><\/span><\/strong><\/span><\/p>\n

\"bandicam<\/span><\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

Shadows are added to the steps of the arch, the walls, and the pillars,
\n to complete drawing after dividing each part naturally.<\/span><\/strong>
\n \u203b soft cross-hatching brush use<\/span><\/span><\/p>\n

\"bandicam<\/span><\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

Compare before correction and after correction.<\/span><\/span><\/strong><\/span><\/p>\n

 <\/p>\n

\u203bLine drawing before correction<\/span><\/strong><\/span>
\n \"bandicam<\/span><\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

\u203bthe finishing without line correction<\/strong><\/span>
\n \"bandicam<\/span><\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

\u203bLine correction + finishing<\/span><\/strong><\/span>
\n \"bandicam<\/span><\/p>\n

 <\/p>\n

 <\/p>\n

From the comparison above you can see the importance of line correction.<\/span><\/strong><\/span><\/p>\n

Line correction is a task you can easily do with Clip Studio Paint function.
\n Please try according to your favorite style.<\/span><\/strong><\/span><\/p>\n

 <\/p>\n

 <\/p>\n

[\/vc_column_text][\/vc_column][\/vc_row][vc_row][vc_column][vc_separator style=”shadow” border_width=”4″ css_animation=”none”][vc_column_text] Related Materials<\/strong><\/span> [\/vc_column_text][thememove_woo_products title_color=”#ffffff” title_bgcolor=”#111111″ view=”products-slider” loop=”yes” auto_play=”yes” auto_play_speed=”5000″ nav_type=”both” number_of_cols_md=”4″ orderby=”rand” order=”DESC” ids=”6586, 9289, 9296, 9366″ slider_responsive=”lg:-1,sm:-1,xs:1″][vc_separator style=”shadow” border_width=”4″ css_animation=”none”][\/vc_column][\/vc_row]<\/p>\n<\/div>","protected":false},"excerpt":{"rendered":"

[vc_row][vc_column][vc_column_text]\u00a0 3D LT conversion\u00a0is a dreamlike function that can\u00a0draw a line drawing with just one click. But 3D line drawing is same in all thickness and mechanical in nature. It is also easy\u00a0to recognize 3D line drawings at a glance. For this reason, 3D line drawing requires editing with functions of “correct line width tool” and “line correction filter”. This page introduces line correction of 3D line drawing based on brick arch 3D material.   Please refer to the following link for basic usage of 3D material. \u25cfBasics of 3D materials       \u00a0 Tips for 3DLT line drawing correction \u00b7 Brick making       It is a […]<\/p>\n","protected":false},"author":1,"featured_media":7955,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":false,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2}},"categories":[371,106],"tags":[113],"class_list":["post-7359","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-3d_ad","category-all","tag-t-3d-line-en"],"aioseo_notices":[],"jetpack_publicize_connections":[],"jetpack_featured_media_url":"https:\/\/i0.wp.com\/manga-materials.net\/en\/wp-content\/uploads\/2016\/05\/63bb037abc5eeff8aadf1ade34106d9e.jpg?fit=500%2C430&ssl=1","jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/s8ZU5s-senhosei","_links":{"self":[{"href":"https:\/\/manga-materials.net\/en\/wp-json\/wp\/v2\/posts\/7359","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/manga-materials.net\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/manga-materials.net\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/manga-materials.net\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/manga-materials.net\/en\/wp-json\/wp\/v2\/comments?post=7359"}],"version-history":[{"count":0,"href":"https:\/\/manga-materials.net\/en\/wp-json\/wp\/v2\/posts\/7359\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/manga-materials.net\/en\/wp-json\/wp\/v2\/media\/7955"}],"wp:attachment":[{"href":"https:\/\/manga-materials.net\/en\/wp-json\/wp\/v2\/media?parent=7359"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/manga-materials.net\/en\/wp-json\/wp\/v2\/categories?post=7359"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/manga-materials.net\/en\/wp-json\/wp\/v2\/tags?post=7359"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}